Console Flat Pack Kits - Assemble Yourself

PLEASE NOTE - All guide prices following below do not include VAT - Please add the applicable rates

The IP HOMENET™ consoles have been designed to cater for past, present and future innovative technologies.
Please Note - Flat packs are shown as (18u), (9u) or (6u) sizes.
This is the total number of rack units shown indicated as (3u), (2u,) or (1u) that can be inserted into each console, add them up!

The flat pack kit is easily assembled to a shell using pre-drilled panels and screws/pins/nuts etc.
The front side panels are fully populated with snapin plugs allowing unique positioning of any rack.
The console sides have slots with brushed protection allowing cable access to the service host racks.
The consoles have detachable Top/Bottom panels and Open back allowing installation cable access

Additional active Television & Audio Hubs can be also be integrated

Order Details
Various Console Configuration Details
IP-700-118
18U Flat Pack
£142.50
Assembled size in mm H=800 x W=330 x D=170
2 x (18u) Side panels complete with 64 pins & plugs.
2 x Top\Base Covers complete with 8 screws.
2 x Rear\side mounting brackets with 8 pins & nuts.
IP-700-109
9U Flat Pack
£112.50
Assembled size in mm H=400 x W=330 x D=170
2 x (9u) Side panels complete with 36 pins & plugs.
2 x Top\Base Covers complete with 8 screws.
1 x Rear\side mounting bracket with 4 pins & nuts.
IP-700-106
6U Flat Pack
£97.50
Assembled size in mm H=267 x W=330 x D=170
2 x (6u) Side panels complete with 24 pins & plugs.
2 x Top\Base Covers complete with 8 screws.
1 x Rear\side mounting bracket with 4 pins & nuts.
4 Size Flat packs 6u - 9u - 12u - 18u

The Telephone rack IP-700-005 is plugged into a single telephone socket and the line is then shared between the 4 front sockets. The Patching cord IP-700-080 is connected from one of the 4 front output sockets to the required outlet termination rack socket. The Master adapter IP-100-626 is used to interface / connect a telephone to the corresponding outlet.
For additional Patch cords and adapters please see the accessories page.
Order Details
Description of Product Build
Telephone Distribution Rack
IP-700-005
Telephone Rack
£44.80
1 x (1u) PSTN Line in to 1 x 4 ports out
1 x IP-700-080 Blue to Black-0.5 mtr Patch Cord
1 x IP-100-626 PSTN Master Adapter
IP-700-050 - CLICK FOR CONNECTION DIAGRAM

The numbered termination racks are mounted in the console and connect to all the outgoing cables distributed throughout the home. The other end of the cables are connected to the corresponding numbered outlets providing a pathway for distributed services.
Order Details
Description of Product Build
Cat 5e 24 Port Termination Rack
IP-700-030
Termination Rack
£97.85
1 x (2u) 24 Port Outlet Termination Rack
Selection of numbers supplied with the rack.
IP-700-029 to 037 racks

The shelf rack is utilised to contain additional equipment such as network hubs etc.
The Blank rack is used as spacing to enable new developed racks to be inserted in the future.
The Cable Management rack is used to route and keep tidy excess patching cables .
Order Details
Description of Product Build
Shelf for auxiliary equipment
IP-700-766
Shelf Rack
£12.60
1 x (2u) Shelf Rack
IP-100-766
Order Details
Description of Product Build
Blanking Rack for future expansion
IP-700-040
Blank Rack
£5.63
1 x (1u) Blank Rack
IP-700-040
Order Details
Description of Product Build
Cable Management / Tidy Rack
IP-700-045
Cable Tidy Rack
£12.45
1 x (1u) Cable Management Rack
IP-700-045